I am a man. A beer drinking, Copenhagen usin', stinky MAN!
I have never really worried what I looked like,how I smelled, or worried about how much red meat I eat.
But today I messed up. We (the family) will be going to the beach soon. In ...lets say 2 to 6 weeks....Last year I had a little bit of sun poisoning. So today I used a tanning bed. It was hard to walk into a place that was full of 20 something good looking people. I am not worth looking at to most. But I did it because I didn't want toburn at the beach. Or have people try to roll me back into the water........ But that is beside the point.
Anyway, I felt that a stand up "bed" was more manly. I hear it is a "level 2" bed. But I don't know what that is.... Anyway, this is my first time, I have NO idea what I am doing, and I tell them to set me at 12 min.
I now know, hours later, this was a mistake. Well, I knew it was a mistake 30 minutes after I left. But it is getting worse. The red has done spread.....And I don't want to tell you that 7 minutes into it I took off the undies... So I will just tell you that I HURT almost everywhere!
If anyone was unlucky enough to look in on the cams around noon, you may have caught my fat ass walking all over the house without a shirt. Sorry.. I hope I didn't damage your eyes. I try to keep my clothes on when the cameras are running.. And now, I look like a lobster. A fat one.. Ready to be put in a pot.
And I still feel like a girl for going to a tanning bed in the first place.
So if are unlucky enough to tune in and see me half dressed, it is because I am a little hot... And my skin hurts....
Till next time....
Bk
Thursday, June 18, 2009
Monday, June 15, 2009
June 15th update. Or computer problem update. Or brewin' update, or ...... whatever...
OK. So my living room computer hasn't been connected to the internet for a while now. I figure the problem is in the Cat-5 wire, or the on board network card. Is it a card if it is on the motherboard? Anyway, I had some ends put on a cable, and it worked. ((See other post.)Did I post that? Not that anyone reads this). Anyway, I didn't want to crawl under the house so I decided to cut into the cat-5 wire that the dog chewed into. ( Three times). I cut it all out AGAIN,and did a little splice job. It seems to be working again so I will leave it alone! We will see what happens.
On the beer front, On Saturday I made a 10 gallon batch of American Pale ale. It looks good so far. In a week to 15 days I move it to secondaries. I hope to brew again in two weeks,but it depemds how this one turns out.
I have the grains, so I must brew.......................
I have no Idea what I have put to paper(ONLINE), so I hope spelling and grammer is a littke OK, But as always, I do this for ME!
On the beer front, On Saturday I made a 10 gallon batch of American Pale ale. It looks good so far. In a week to 15 days I move it to secondaries. I hope to brew again in two weeks,but it depemds how this one turns out.
I have the grains, so I must brew.......................
I have no Idea what I have put to paper(ONLINE), so I hope spelling and grammer is a littke OK, But as always, I do this for ME!
Tuesday, June 9, 2009
Computer update.
Well, the computer was on and off all day. I figured it was the network card or the cat5 wire. You know, the one that has been chewed in half three times by a little crap eatin' dog. So I figured it was the wire.
I had a new cable made and so far the computer is still online. So I will hope this is the only problem. Right now the cable is running all over the house. I guess when I get time, I will crawl in the dirt under my house and run this new cable.
I hate bugs........
Now,I need about 6 gigs of old memory for these machines.. So if you have any PC2100 or 2700, drop them in the mail!
I had a new cable made and so far the computer is still online. So I will hope this is the only problem. Right now the cable is running all over the house. I guess when I get time, I will crawl in the dirt under my house and run this new cable.
I hate bugs........
Now,I need about 6 gigs of old memory for these machines.. So if you have any PC2100 or 2700, drop them in the mail!
Computer problems re-load
Well, Pluto is down again. This computer is driving me nuts. I have lost three cameras again, and have no idea why. WebcamXP starts, and seems to be running, but I can't maximize it. And add to the fact that it doesn't seem to be getting out to the net. I will be going out of town next month and wanted to keep an eye on the house, not sure I will be able to do that now.
Anyway, just wanted to let you all know what was going on. I haven't turned them off, they just wont come on!!!
Anyway, just wanted to let you all know what was going on. I haven't turned them off, they just wont come on!!!
Saturday, June 6, 2009
Beer, beer,and MY beer.
I have been picking up a LOT of store purchased beer. Nothing wrong with that I guess. When I need good beer, I just go to Ohio, or Kentucky. If I don't make it out of town, I just pick up the best (LOL) of what I can here in town. I did make my very first batch of all grain on May 3rd. and it was great. I gave the first 5 gallons away, but I still have 5 gallons or more in a carboy in my basement. Long story short, I need to keg this batch! I am sick of going to the store when I have beer ready to go. I just need to keg the damn thing. So I have a keg soaking. I picked up some more tubing tonight to transfer with, so first thing in the AM I will move this beer to a keg. Monday noght I will have 5 gallons on tap to drink. Only other thing I have on hand is a Barley Wine, and a Mead. The barley wine is not something I like. But I made it almost two years ago when I really didn't know what I liked yet. It is good. Don't get me wrong. It is far better then I ever thought it would be, and might wine me an award or two, but not something I can sit and drink. The mead, well, you don't want to drink more then half a glass or two at a time. It is some strong stuff! It is also about two years old.
This coming Saturday I will be doing my second ever batch of all grain. It will be ten gallons of American Pale Ale. It will be close to 4 weeks before I can drink it, but maybe I wont need to pick up any beer before it is ready. I hope to brew again within 2 or 3 weeks after this APA. Before long I willl be caught up. I don't have many friends and I am not sure why ( It must be me....) but how many people do you know with 5 taps in the back room? Come 6 or 7 weeks, I will have them all running. Friends or no, I can drink myself happy.... Or try..............
I have 2 pounds of hops coming in the mail in the next day or so, and Thursday I will be picking up 110Lbs. of grains. This should last me for a few brews!
Later....
This coming Saturday I will be doing my second ever batch of all grain. It will be ten gallons of American Pale Ale. It will be close to 4 weeks before I can drink it, but maybe I wont need to pick up any beer before it is ready. I hope to brew again within 2 or 3 weeks after this APA. Before long I willl be caught up. I don't have many friends and I am not sure why ( It must be me....) but how many people do you know with 5 taps in the back room? Come 6 or 7 weeks, I will have them all running. Friends or no, I can drink myself happy.... Or try..............
I have 2 pounds of hops coming in the mail in the next day or so, and Thursday I will be picking up 110Lbs. of grains. This should last me for a few brews!
Later....
Saturday, May 30, 2009
Part 3
Well everything seems to be working again. Don't ask me why. I have no clue.
You see, I gave up. I was going to calm down for a while and start fresh. Thought I would start with a new cat5 wire, might replace the network card, and then dig into the software side. Then one day the camera moved. Someone had clicked a movement button and it worked. So I knew it must be back up on the net.
No idea or clue what was wrong... and that makes me worry even more. Cause now I wonder when they will go out again.
Oh well.
Nothing much more to report. Cameras are up, pool is open, the kids are still the kids, and I still need $750,000.00
You see, I gave up. I was going to calm down for a while and start fresh. Thought I would start with a new cat5 wire, might replace the network card, and then dig into the software side. Then one day the camera moved. Someone had clicked a movement button and it worked. So I knew it must be back up on the net.
No idea or clue what was wrong... and that makes me worry even more. Cause now I wonder when they will go out again.
Oh well.
Nothing much more to report. Cameras are up, pool is open, the kids are still the kids, and I still need $750,000.00
Wednesday, May 27, 2009
Problems part 2
Well people, I can't figure this out. I thought my three cameras were down do to a cat5 wire. Guess I was wrong. My daughter clicked on internet explorer and up it popped. So now I am pissed. I could have fixed a cable. Software side? Website side? Router? I have looked at all The things that I know about. And let me tell you, that isn't much. I have been upset the past week or so about thousands of things, so this doesn't help. It makes me mad that I am so damn stupid when it comes to computer stuff. Things that I should be able to fix.... So I just get mad, and hate myself even more.I love my little site. I love looking in from work. It is one of my two hobbies.And I can't fix it when it breaks. Some damn hobby.
Well, everything else in my life is going to hell, so why not this site too.......
Well, everything else in my life is going to hell, so why not this site too.......
Subscribe to:
Posts (Atom)